XPL 3000 setup without using mac adress.

[Nimiq]

Is there any way to setup a XPL 3000 without a mac address ?

[Ryu1]

yes, while in server setting, enter server url then check box where it says streaming line, then check box user credentials and enter username and password from your provider then connect.

[Nimiq]

Thanks, would be possible that for those 3000 xpl the address is different as i remember seeing somewhere that p5.iptvprivateserver.ru c need to be changed with something including the http:// and /c/ ?

[Ryu1]

I dont have one but you can just try with or without /c and see what happens. I would try this first

http://p5.iptvprivateserver.ru/c

[ROT10]

You shouldn't need the /c if not using mac option.
In server settings/setup scroll down and there should be at least 3 slots to enter XCAPI info.

[Nimiq]

I dont have one but you can just try with or without /c and see what happens. I would try this first

http://p5.iptvprivateserver.ru/c

Thanks, il try that.

[Nimiq]

You shouldn't need the /c if not using mac option.
In server settings/setup scroll down and there should be at least 3 slots to enter XCAPI info.

The M3u playlist ?

[ROT10]

The M3u playlist ?

Just go with post #2 and no mac is needed.Just verified on my XPL 3900.