Announcement

Collapse

NEW NFPS WEBSITES & EMAIL

In order to serve you better we have moved our websites to the following domain names:

Papiao: https://papiao.is

NFPS Main Site: https://iptvprivateserver.is

NFPS Website Hispana: http://servidoriptvprivado.is

NFPS Foro Hispano: http://servidordeiptv.is

E-Mail: [email protected]
See more
See less

Blank Screen

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Blank Screen

    Hi,

    After putting in all the correct information in portal url etc. I;m getting a blank screen. Tried IPTV reset and changing portal but no luck . Tried on IPTV stb and STB emulator from play store. Please assist.

  • #2
    Figure it out . I update to 0.86 and it's working

    Comment


    • #3
      Factory Data ResetHaving trouble with your box? Is something not working when it should? A factory reset might fix your problem. Both resets perform the exact same thing. Only use the manual reset if you cannot get the box to boot properly. BEFORE YOU CONTINUE, make sure to re-input your information when you start up the box for the first time. Also write down or save any information you might need, the factory reset will completely wipe your box of any saved data.


      Regular Factory Data Reset.Go to the settings tab in the main menu > Click on the pink system info button > Click on factory data reset.


      Manual Factory Data Reset.
      1) Make sure the box is connected to the TV by HDMI or RCA
      2) Make sure the power is plugged out of the box
      3) Push and hold the reset button with the pin for 10 seconds
      4) Continue to hold it down and plug the power into the box
      5) Hold the reset button for at least another 5 seconds and then let go
      6) Proceed to wait for a bit while the box resets, it should open up again in console mode
      7) Select the factory data reset option
      8) The box will perform a factory data reset and reboot
      9) It should then boot normally and start working. If it boots into the console mode again, make sure to just select perform normal boot up (I believe it is the first option)

      C/P Avov Technology

      /////////////////////////////////////////////////////////////////////////////
      Did Factory reset, but now stuck on console…..

      Factory Data ResetHaving trouble with your box? Is something not working when it should? A factory reset might fix your problem. Both resets perform the exact same thing. Only use the manual reset if you cannot get the box to boot properly. BEFORE YOU CONTINUE, make sure to re-input your information when you start up the box for the first time. Also write down or save any information you might need, the factory reset will completely wipe your box of any saved data.


      Regular Factory Data Reset.Go to the settings tab in the main menu > Click on the pink system info button > Click on factory data reset.


      Manual Factory Data Reset.
      1) Make sure the box is connected to the TV by HDMI or RCA
      2) Make sure the power is plugged out of the box
      3) Push and hold the reset button with the pin for 10 seconds
      4) Continue to hold it down and plug the power into the box
      5) Hold the reset button for at least another 5 seconds and then let go
      6) Proceed to wait for a bit while the box resets, it should open up again in console mode
      7) Select the factory data reset option
      8) The box will perform a factory data reset and reboot
      9) It should then boot normally and start working. If it boots into the console mode again, make sure to just select perform normal boot up (I believe it is the first option)

      C/P Avov Technology






      Comment

      Working...
      X