IPTV HD Video Streams

[laman4five]

Sony TV
Internet Speed >90
MX10 Box works without problem

I am having trouble streaming live HD streams. I sound is constant but the video pauses and then resumes. I have followed the sticky Settings HD streams "https://iptvzeta.is/forum/nfps-iptv-private-server/kodi-xmbc/kodi-tutorials/67348-settings-in-kodi-android-stb-s-for-iptv-hd-video-streams" and Media Coded Hardware.

I do not know what else to try. Will turning off buffers in advancedsettings.xml make a difference?

Other suggestions?

[kens]

Type of SoC (System on a Chip) Chipset (CPU/GPU) in MX10 - RockChip
Info- https://en.wikipedia.org/wiki/Rockchip

Do you have the proper Kodi version for that box?
(You have 64bit architecture, so you should run ARMV8A (not V7A))
https://kodi.tv/download
Click android and this window will open;

[kens]

*** Sorry, could not get this section in the above Post. (I Think i broke the Forum!!!)

(uninstall the Kodi that you have now (unless it is 17.6 - 64bit ) and install 64bit version)
* If you can, set your Android Settings/ Display/ HDMI/ Resolution - to 1920 x 1080p -30( this provides a better match for the progressive format (1080p) than the interlace format(1080i)
The HD IPTV h.264 format is 1920 x 1080 - 29.97fps (30 frames per second) so setting your STB to refresh rate of 30 instead of 60 results in smoother playback (but you might find menu scrolling etc, not as smooth in appearance)
also, i have the Rockchip 3399, which is the next gen up from yours, and I Enable MediaCodec(Surface) only, which seems to work better.
As long as you have the other Kodi Player settings set as shown in the posted video tips, you should be good.
/kens

[laman4five]

Sorry about the confusion. The MX10 box works perfectly.

The Sony TV Android TV has Kodi 17.6 installed and it is 32 bit.

[kens]

Use Perfect Player on the TV, instead of Kodi, only because of the problems decoding the 1080p h.264 channels.
/kens

[laman4five]

Use Perfect Player on the TV, instead of Kodi, only because of the problems decoding the 1080p h.264 channels.
/kens

I installed Perfect Player. Where is guide to setup "Perfect Player"? Do I need full version? I don't see where to put in our codes.

[kens]

I installed Perfect Player. Where is guide to setup "Perfect Player"? Do I need full version? I don't see where to put in our codes.

video tutorial (download and play.

http://www.mediafire.com/file/nt5p5dvjlxq1wpo/PP_Android_NFPS_Tutorial.mp4/file

** *Note: By default PP Hides the EPG data. To see the EPG. if using a mouse, at the top of the left of screen Channel list, and on the right side of the Genre (All Channels, Entertainment etc) click the small square icon (submenu). Click EPG Show EPG.
If using a remote, press and hold OK until the submenu appears, then select Show EPG.

Set the Decoder setting to auto
Use the guide_ks.xml URL for the guide
/kens