Announcement

Collapse

NEW NFPS WEBSITES & EMAIL

In order to serve you better we have moved our websites to the following domain names:

Papiao: https://papiao.is

NFPS Main Site: https://iptvprivateserver.is

NFPS Website Hispana: http://servidoriptvprivado.is

NFPS Foro Hispano: http://servidordeiptv.is

E-Mail: [email protected]
See more
See less

Kodi Version 16 and above PVR Stalker Client Setup Instructions

Collapse
This topic is closed.
X
This is a sticky topic.
X
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Kodi Version 16 and above PVR Stalker Client Setup Instructions

    Get the most recent version of Kodi from the Playstore (Android) or
    for any Platform here -> hxxps://kodi.tv/download/

    * (All I/P Addresses shown as hxxp or hxxps, replace with http or https -(No Live Links Rule))

    -Install and run Kodi

    -Go to System Settings/Add Ons/My Add Ons/PVR Clients/Stalker Client.

    ***Note
    The KODI Settings screen has 4 levels of access, located at the bottom left of the screen. To access all required settings, click the Tab until “Advanced" or "Expert” level is indicated.

    -Select Configure

    -Set Portal 1 and Connection timeout to 120

    -Enter your MAC#
    Format Example( 00:1A:78:xx:xx:xx ) Replace the x’s, with your last digits from your STB’s MAC# or your PC /Apple/RasPi/Fire/DL-T/etc. MAC# …or
    make up a random number in HEX from 00 to FF (Example: 2A:B9:43)

    -Leave the Time Zone as is.

    -Enter your Server Address (Info located from your donation information at Papiao
    here -> hxxps://papiao.is/main/search_nfps

    *** Note Kodi 16 doesn't handle URL forwarding
    So you need to add "/c/index.html" at the end of the IPTV server listed for your donation in the donation checker for example:

    p1.iptvprivateserver.tv must be:

    Code:
    http://p1.iptvprivateserver.tv/c/index.html
    and for p2.iptvprivateserver.tv:

    Code:
    http://p2.iptvprivateserver.tv/c/index.html
    -Enter your Login & Password
    (Login & Password both require your donation#)

    -Enter a random Serial Number - should be a minimum 13 digit number (I use 6 numbers/1 Letter/ 6 numbers)

    -Enter a random Device ID - Should be a minimum 12 digit number (I use numbers only)

    *(Token/Device ID2/Signature should be blank (at this time they are redundant fields))

    EPG info:
    -Set to Prefer XMLTV

    Remote URL:
    URL Address :
    hxxp://yahyabell.com

    Save your settings by clicking OK, then Enable Stalker by clicking “Enable”.


    * You Must now go to Papiao Site and "Associate" your MAC# you entered above, with your Donation#.
    Once you have done that...


    Go back to Settings/TV - General Tab
    -There are 3 settings regarding using Channel Numbers and Groups and Sync from the Back End. Enable all 3.

    -Then Select "Enable".

    Kodi should now attempt to connect. A message window in the top right corner of the screen will appear.
    It will say "Loading Channels from Clients (if successful, Kodi will Include a "TV" Icon on the Menu Bar)
    It will then Attempt to load the Guide. Let the system load everything before you attempt to watch TV.
    If there is a problem, (Error Message at bottom right of Screen), Shut down and Restart KODI.

    If you still have problems, post your results.


    FYI - IPTV Reset is used to clear Device ID Information stored in the server ONLY.

    You can only do this twice in a 24hr. period, so dont over use this function to try to correct a problem unrelated to your Dev ID1 Information.
    (Next time you connect, it records the Device id you have entered in your configuration settings).


    Good Luck and Happy Viewing
    /kens
    I am not a "BOT"!
Working...
X