Announcement

Collapse

NEW NFPS WEBSITES & EMAIL

In order to serve you better we have moved our websites to the following domain names:

Papiao: https://papiao.is

NFPS Main Site: https://iptvprivateserver.is

NFPS Website Hispana: http://servidoriptvprivado.is

NFPS Foro Hispano: http://servidordeiptv.is

E-Mail: [email protected]
See more
See less

The channels on mag 256 works?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • The channels on mag 256 works?

    I cant see any channel on mag 256. There are problems with this box or firmware???? All is ok, but no channel.

  • #2
    Now i can see foreign channels, but the principal channels on english down.

    Comment


    • #3
      I just got my new mag256 and it seems like only the foreign channels are fine but channels like cnn or others not working, i see the loading bar but nothing after.

      just to let everyone know that the same channels NOT working on mag256 are working fine on mag254.

      I tried to tweak everything but no luck. i had to update the firmware so not sure if the new firmware has anything to do, anyone know if I can go back to old firmare and try...

      any idea

      Comment


      • #4
        well, i was able to download Sept 2016 firmware and downgrade my firmware using USB and seems like the channels start working again......

        maybe you should try to downgrade and see if that works for you....

        Comment


        • #5
          Eddieboo, hi. Where i can find the page to obtain the past firmware? You can help me ?

          Comment


          • #6
            I have the same issue with my MAG 256. Getting some foreign channels not all but not getting US channels such as CNN, MSNBC, Fox etc. If it's an upgrade up my firmware to Sept 2016,, can you let me how I do it?

            Comment


            • #7
              HI Liv359 , we wait for eddieboo, I search on web to find the firmware 2016 to downgrade but I can't find it. I hope eddieboo post the internet page or send me the file.

              Comment


              • #8
                sorry guys for late reply, here is the link...its on infomir site but little tricky


                download the imageupdate file ONLY and follow the steps as bellow.


                http://soft.infomir.com.ua/mag256/release/0.2.20-a7.7/

                here is how you update using USB

                Using a USB flash drive in the embedded portal

                Create directory mag256 on the USB-drive and place file imageupdate into directory.
                Go to “System settings” by pressing «Setup», «Services» or «SET» on the remote control (depending on the version the remote control)
                Select “Software update”.
                Select update “From USB” ? “Start update”. If the preceding items are correct you will see a window with information about the current software version, select the drive or partition and the file path.
                Select “Verify”. If the test is successful you'll see information about the availability of new versions of software.
                Select “Start update” to begin the update.
                After the update successful - STB must be rebooted.


                PROBLEM : the only issue is this damn mag256 also check the update if you reboot it so dont reboot the box unless you have to and if you do it will update to the latest one and you will have to do it all over again.


                let me know any issue updating the FW

                Comment


                • #9
                  When you said create a directory, you refer a file? And I see the file download on .txt text file. That's is correct?

                  Comment


                  • #10
                    Originally posted by Aracibo View Post
                    When you said create a directory, you refer a file? And I see the file download on .txt text file. That's is correct?
                    negative.

                    not sure how are you downloading the file but it shouldn't be as text file, its an image file and after downloading when you right click file and click properties then the type of file should be "file"

                    also once you download the file on your local computer, create a directory mag256 on your USB drive and copy the file you downloaded to the mag256 directory in USB.

                    make sure you need ONLY "imageupdate" file to download


                    Comment


                    • #11
                      thats how i see the file after downloaded

                      Comment


                      • #12
                        Perfect!!!!!!!!!!!!!!! I only eliminate the extension .text and the imageupdate be a file document. we do the instruccions and now I the channels available.Thanks!!!!!!!!!!!!!!

                        Liv359 its working!!!!!!!!

                        Comment


                        • #13
                          Good.

                          remember......
                          PROBLEM : the only issue is this damn mag256 also check the update if you reboot it.... so dont reboot the box unless you have to and if you do it will update to the latest one and you will have to do it all over again.

                          Comment


                          • #14
                            Ok...Thanks

                            Comment


                            • #15
                              This link is not working. Can you help


                              http://soft.infomir.com.ua/mag256/release/0.2.20-a7.7/

                              Comment

                              Working...
                              X